Featured Articles

WordPress Profiling with XHProf (Debugging & Optimizing Speed)
Crowdfunding on Crowd Supply (Review of my experience)
Trusted Boot (Anti-Evil-Maid, Heads, and PureBoot)
WordPress Multisite on the Darknet (Mercator .onion alias)
Nightmare on Lemmy Street (A Fediverse GDPR Horror Story)
Detecting (Malicious) Unicode in GitHub PRs
Continuous Documentation: Hosting Read the Docs on GitHub Pages (2/2)
Hardening Guide for phpList
Introducing BusKill: A Kill Cord for your Laptop
previous arrow
next arrow

Make Vector Topographic Maps (Open Street Map, Maperitive, and Inkscape)

How-to Guide to Making Vector Topo Maps with Maperitive and Inkscape

This guide will show you how to generate vector-based topopgraphic maps, for printing very large & high-quality paper wall maps using inkscape. All of the tools used in this guide are free (as in beer).

Intro

I recently volunteered at a Biological Research Station located on the eastern slopes of the Andes mountains. If the skies were clear (which is almost never, as it’s a cloud forest), you would have a great view overlooking the Amazon Rainforest below.

Yanayacu is in a cloud forest on the east slopes of the Andes mountains, just 30 km from the summit of the glacial-capped Antisana volcano (source)

The field station was many years old with some permanent structures and a network of established trails that meandered towards the border of Antisana National Park – a protected area rich with biodiversity that attracts biologists from around the world. At the top of the park is a glacial-capped volcano with a summit at 5,753 meters.

Surprisingly, though Estacion Biologicia Yanayacu was over 30 years old, nobody ever prepared a proper map of their trails. And certainly there was no high-resolution topographical map of the area to be found at the Station.

That
. . . → Read More: Make Vector Topographic Maps (Open Street Map, Maperitive, and Inkscape)

3TOFU: Verifying Unsigned Releases

Verifying Unsigned Releases with 3TOFU

This article introduces the concept of “3TOFU” — a harm-reduction process when downloading software that cannot be verified cryptographically.

⚠ NOTE: This article is about harm reduction.

It is dangerous to download and run binaries (or code) whose authenticity you cannot verify (using a cryptographic signature from a key stored offline). However, sometimes we cannot avoid it. If you’re going to proceed with running untrusted code, then following the steps outlined in this guide may reduce your risk.

TOFU

TOFU stands for Trust On First Use. It’s a (often abused) concept of downloading a person or org’s signing key and just blindly trusting it (instead of verifying it).

3TOFU

3TOFU is a process where a user downloads something three times at three different locations. If-and-only-if all three downloads are identical, then you trust it.

Why 3TOFU?

The EFF’s Deep Crack proved DES to be insecure and pushed a switch to 3DES.

During the Crypto Wars of the 1990s, it was illegal to export cryptography from the United States. In 1996, after intense public pressure and legal challenges, the government officially permitted export with the 56-bit DES cipher — which was a known-vulnerable cipher.

But there
. . . → Read More: 3TOFU: Verifying Unsigned Releases

Crowdfunding on Crowd Supply (Review of my experience)

Crowd Supply Review - My experience crowdfunding $18,507 in open-source security hardware

In 2021, I raised $18,507 on CrowdSupply to manufacture and sell the BusKill cable. This article will review my experience working with Crowd Supply.

Introduction

So you have a great idea for a cool product, but you’re not sure how to scrap up the necessary funds to ramp-up production and sell it? If you’re a traditional capitalist then you’d be considering financing your new entrepreneurial venture through loans or venture capital.

But you’re not a capitalist. You want to avoid the fat cats draining equity from your hard labor. Your idea is so cool, why not try your hand at crowdfunding direct from your soon-to-be customers?

Why Crowd Supply?

The first place I looked was Kickstarter. But I did some googling, and I saw so many people complain that they backed a project on kickstarter and never received anything from the creator. In fact, Kickstarter’s own Fulfillment Report says that 9% of all their projects fail to deliver.

And, especially in the computer security department, if anyone with half a brain scans through the projects on kickstarter, even the ones that raise $1 million scream SCAM! Either their promises are unrealistic, they clearly have no idea what they’re talking
. . . → Read More: Crowdfunding on Crowd Supply (Review of my experience)

Monitoring Tor .onion Websites (uptime alerts)

Uptime Monitoring of Tor .onion Websites

This article will present a few simple website availability monitoring solutions for tor onion services.

Problem

So you’ve just setup an Onion Service for your website, but how often do you actually check that it’s working? Maybe it’s a .onion alias to an existing website, and you usually only check it on the clearnet. What’s to prevent the darknet presence of your website from going down for weeks without you noticing?

Indeed, it’s important to monitor your .onion websites so that you can discover and fix issues before your customers do. But how? Most of the popular uptime monitoring solutions (pingdom, freshping, statuscake, etc) certainly can’t monitor .onion websites.

This guide will enumerate some solutions for monitoring .onion websites, so you get an email alert if your site goes down.

Michael Altfield

Hi, I’m Michael Altfield. I write articles about opsec, privacy, and devops ➡

About Michael


. . . → Read More: Monitoring Tor .onion Websites (uptime alerts)

WordPress Multisite on the Darknet (Mercator .onion alias)

How to use a .onion with Wordpress Multisite

This article will describe how to point a .onion domain at your existing wordpress sites (on wordpress multisite) so that your website will be accessible both on the clearnet and directly on the darknet via a .onion domain.

Intro

There are numerous security benefits for why millions of people use tor every day. Besides the obvious privacy benefits for journalists, activists, cancer patients, etc — Tor has a fundamentally different approach to encryption (read: it’s more secure).

Instead of using the untrustworthy X.509 PKI model, all connections to a v3 .onion address is made to a single pinned certificate that is directly correlated to the domain itself (the domain is just a hash of the public key + some metadata).

Moreover, some of the most secure operating systems send all the user’s Internet traffic through the Tor network — for the ultimate data security & privacy of its users.

In short, your users are much safer communicating to your site using a .onion domain than its clearnet domain.

For all these reasons, I wanted to make all my wordpress sites directly available to tor users. Unfortunately, I found that it’s not especially easy to point a .onion domain at
. . . → Read More: WordPress Multisite on the Darknet (Mercator .onion alias)

We’re on the Darknet! Visit this site at our tor .onion

Visit this site on our .onion

This website is now accessible on the darknet. And how!

Why

Fun fact: the most popular website on the darknet is facebook. There are hundreds of other popular sites on the darknet, including debian, the CIA, the NYT, the BBC, ProPublica, and–now–michaelaltfield.net.

michaelahgu3sqef5yz3u242nok2uczduq5oxqfkwq646tvjhdnl35id.onion

michaelahgu 3sqef5yz3u2 42nok2uczdu q5oxqfkwq64 6tvjhdnl35i     d.onion

All of these organizations chose to make their websites available over .onion addresses so their website will be accessible from millions of daily tor users without leaving the darknet. Besides the obvious privacy benefits for journalists, activists, cancer patients, etc — Tor has a fundamentally different approach to encryption (read: it’s more secure).

Instead of using the untrustworthy X.509 PKI model, all connections to a v3 .onion address is made to a single pinned certificate that is directly correlated to the domain itself (the domain is just a hash of the public key + some metadata).

Moreover, some of the most secure operating systems send all the user’s Internet traffic through the Tor network — for the ultimate data security & privacy of its users.

In short, your users are much safer communicating to your site using a .onion domain than its clearnet domain.

For all these reasons, I
. . . → Read More: We’re on the Darknet! Visit this site at our tor .onion

Continuous Documentation: Hosting Read the Docs on GitHub Pages (1/2)

Continuous Documentation with Read the Docs (1/2)

This post will describe how to host a sphinx-powered site (using the Read the Docs theme) on your own GitHub Pages site, built with GitHub’s free CI/CD tools.

ⓘ Note: If you don’t care about how this works and you just want to make a functional repo, you can just fork my ‘rtd-github-pages’ GitHub repo.

Michael Altfield

Hi, I’m Michael Altfield. I write articles about opsec, privacy, and devops ➡

About Michael


. . . → Read More: Continuous Documentation: Hosting Read the Docs on GitHub Pages (1/2)

Introducing Coviz

Projected Future Spread of COVID-10 on Earth (e2a Apr 07)

I woke up on April 2nd to discover that over 1 million people on earth had tested positive for coronavirus. “I couldn’t find a website that was extrapolating the COVID-19 dataset, so I decided to build one”

It took over 4 months for COVID-19 to hit 1 million world-wide, and the graph was showing a horrifying exponential growth of cases. When I saw this, a question popped-into my head: when will it hit 2 million? (spoiler: it took only 13 days to go from 1 million to 2 million)

When will it infect 4 million? 8 million? 100 million? 1 billion? 50% of the population on Earth?

I searched-and-searched, but I couldn’t find a website that was extrapolating the COVID-19 dataset daily to predict the future spread of the virus, so I decided to build one myself.

Michael Altfield

Hi, I’m Michael Altfield. I write articles about opsec, privacy, and devops ➡

About Michael


. . . → Read More: Introducing Coviz

Hardening Guide for phpList

phpList Hardening Guide Featured Image

This post will outline recommended steps to harden phpList after install to make it reasonably secure.

phpList is the most popular open-source software for managing mailing lists. Like wordpress, they have a phplist.com for paid hosting services and phplist.org for free self-hosting.

Earlier this week, it was announced that phpList had a critical security vulnerability permitting an attacker to bypass authentication and login as an administrator using an incorrect & carefully-crafted password in some cases. This bug is a result of the fact that [a] PHP is a loosely typed language and [b] the phpList team was using the ‘==‘ operator to test for equality of the user’s hashed password against the DB. This security pitfall has been known in PHP since at least 2010 (a decade ago!), but I’m sure the same mistake will be made again..

Indeed, security is porous. There’s no such thing as 100% vulnerability-free code, and phpList is no exception. But if we’re careful in adding layers of security to our infrastructure, then we might be able to protect ourselves from certain 0-days.

That said, here’s my recommended steps to making your phpList install reasonably secure.

Michael Altfield

Hi, I’m Michael Altfield. I write articles
. . . → Read More: Hardening Guide for phpList

Introducing BusKill: A Kill Cord for your Laptop

Bus Kill: A USB Kill Cord for your Laptop

This post will introduce a simple udev rule and ~$20 in USB hardware that effectively implements a kill cord Dead Man Switch to trigger your machine to self-destruct in the event that you’re kicked out of the helm position.

Rubber Ducky I <3 you; you make hack time lots of fun!

Let’s consider a scenario: You’re at a public location (let’s say a cafe) while necessarily authenticated into some super important service (let’s say online banking). But what if–after you’ve carefully authenticated–someone snatch-and-runs with your laptop?

Maybe you can call your bank to freeze your accounts before they’ve done significant financial harm. Maybe you can’t.

Or maybe your laptop was connected to your work VPN. In less than 60 seconds and with the help of a rubber ducky, the thief could literally cause millions of dollars in damages to your organization.

Surely there must be some solution to trigger your computer to lock, shutdown, or self-destruct when it’s physically separated from you! There is: I call it BusKill.

Michael Altfield

Hi, I’m Michael Altfield. I write articles about opsec, privacy, and devops ➡

About Michael


. . . → Read More: Introducing BusKill: A Kill Cord for your Laptop